The easiest way to extend the coverage of a wireless Wi-Fi network is to combine multiple routers into a single local area network. Typically, this is done using a cable connection of the devices.
Necessary
Network cables
Instructions
Step 1
Let's consider the simplest example - connecting two wireless access points created using Wi-Fi routers. Naturally, we will use a wired connection of the equipment. The fact is that the bulk of routers cannot simultaneously connect to a wireless network and create their own Wi-Fi access point.
Step 2
This method will create an extensive wireless network using a single Internet connection. Select the router to be connected to the internet cable. Make this connection through the Internet (WAN) port of the device.
Step 3
Connect the LAN (Ethernet) port of this router to the WAN (Internet) port of the second device. Connect at least one laptop or computer to each router using the LAN ports. Note: these connections can be made not at the same time, because they are required to enter the device settings menu.
Step 4
Open the settings of the first Wi-Fi router. Establish communication with the provider's server by changing some parameters in the "Network settings" menu. Please check with the specialists of your provider what values you need to enter.
Step 5
Open the Wireless Setup menu. Create a wireless access point. Remember the types of radio signal and encryption you have selected.
Step 6
Go to the settings of the second router. In the "Network Settings" menu, specify that the Internet (WAN) port is the main channel for connecting to the Internet.
Step 7
Configure the wireless access point in the same way as in step 5. Naturally, to avoid confusion, specify a different name (SSID) for this wireless network. Reboot both devices to apply the changed settings.
Step 8
Now any device connected to wireless access points or routers (using a cable) will have access to the Internet and, of course, to each other.
