It is not necessary to call the wizard to connect the TV outlet. It is enough to have a set of tools in your home arsenal and read the instructions for installing this device.
Instructions
Step 1
Pick up a dedicated TV outlet. To do this, decide which device you will connect to it. There are several options: single, double or four contacts. However, you will only connect two contacts to the outlet itself, so the connection principle will not change. After the socket is selected, do the following.
Step 2
Lead the PE-wire from the floor panel into a special junction box. This box can be shared, or just for your apartment. After that, wind the remaining two wires to the RCD input, then connect the phase and zero in the correct order.
Step 3
Arrange all wires in the junction box in accordance with the general electrical circuit for your apartment. Then find the grounding pin. This is a shaped metal plate with a hole. Attach the wire in the indicated hole.
Step 4
To do this, use a threaded bolt. Then, in order to properly connect the TV outlet, you need to correctly connect the two remaining pins. One of these wires is zero, the second is phase. Bring both wires to the edge of the bolt and press them down with the bolt and platinum.
Step 5
Install a special socket in the wall. It is usually made of plastic. To permanently install the TV outlet, secure it to the socket. In order for the outlet to be in the right place, you need to hollow out enough space in the wall for its volume. Use a hammer drill and a winder drill for this.
Step 6
Then, using self-tapping screws, fix the socket in the wall and fix the socket in it. It is possible to use the so-called "mustache" for fixing the socket, but they will not give the required rigidity of fixation. When installing the outlet, pay attention to where the wire comes from. If it goes from above, then it will be better to install the outlet with the contacts down; if the wire goes from the bottom, then, accordingly, install the socket with the contacts up.
