How To Connect A Monitor To A TV Tuner

Table of contents:

How To Connect A Monitor To A TV Tuner
How To Connect A Monitor To A TV Tuner

Video: How To Connect A Monitor To A TV Tuner

Video: How To Connect A Monitor To A TV Tuner
Video: How to connect tv tuner to set top box and monitor. 2024, December
Anonim

Standalone TV tuners are great because they can transmit a signal to a monitor without using a computer. That is, you can watch TV programs without turning on an extra device and without wasting energy. Standalone TV tuners come with everything you need for your device to work.

How to connect a monitor to a TV tuner
How to connect a monitor to a TV tuner

It is necessary

  • - a computer;
  • - cables;
  • - instruction;
  • - TV tuner.

Instructions

Step 1

Open the TV tuner instructions. Find the description of the package. It should indicate the cable used to connect the TV tuner to the computer monitor. Find this cable in the box of your device. If there is no such cable in this configuration, you need to contact a specialized center for purchase.

Step 2

Take a look at the connectors located on the body of the standalone TV tuner. Find the connector that matches the cable. This is often a blue VGA connector. If you cannot determine it yourself, read the instructions for the TV tuner, where there is a description of all the outputs on the case. Usually, the instructions for TV tuners fully describe the procedures for connecting monitors, and screenshots are attached to all actions.

Step 3

Connect the cable to the TV tuner and monitor. In this case, the monitor will need to be disconnected from the connection with the computer. Make sure the computer is turned off. Pulling out the monitor cable while the computer is on may damage the monitor or video card. Do everything carefully, as the slightest mistakes can in some way damage the system, both external modules and software.

Step 4

Connect the power to the TV tuner and press the power button on the TV tuner and monitor. Check that the TV tuner is transmitting the image to the monitor. Make the necessary settings in the TV tuner menu using the remote control (it must be included in the delivery package of the device). Use automatic channel search to form the watch list.

Step 5

Use the cable TV antenna to operate the TV tuner so that the image on your monitor is much clearer. Indoor antennas will not provide the required signal quality. Consult specialized stores or read the relevant information on the Internet.

Recommended: