Stable operation of the computer's cooling system can extend the life of many devices and prevent damage to them. To configure the parameters of the fans, it is recommended to use a set of programs and utilities.
It is necessary
Speed Fan
Instructions
Step 1
First check the fan settings using the motherboard firmware. Turn on your computer. After the first boot menu appears, press the Delete key and wait for the BIOS menu to open.
Step 2
Go to the Advanced Chipset menu. It is important to note that this menu may have a different name in certain card models. Find the item that displays the parameters of the fans installed in the system unit. Remember that not all coolers are configurable. Some models always rotate at a certain constant speed.
Step 3
Make sure the Always Fan function is active. If the firmware allows you to set a specific speed for the fans, select 100%. Set this value for each available cooler.
Step 4
Press the Esc key several times to return to the main BIOS menu. Use the arrows to highlight the Save & Exit Setup field and press the Enter key. Click the Ok button. Wait for the operating system to load.
Step 5
In situations where the functionality of the firmware is very limited, use the Speed Fan application. Install this program and run it. Wait a while while you are presented with information about the status of the available fans.
Step 6
Deactivate the functions of automatic change of the rotation speed of coolers. Set the rate to 100% for each device. When working with a mobile computer, it is wiser not to activate the maximum speeds. This will extend the life of your laptop without connecting a power source.
Step 7
If you want the program to automatically regulate the operation of the coolers, activate the "Auto fan speed" function. Please note that after closing the Speed Fan application, the fan speed will return to its original value.
