For people who are just starting to communicate with a PC, its connection to the network will be a real mystery. Many wires are bound to confuse a person when trying to turn on the computer.
It is necessary
Computer, set of wires
Instructions
Step 1
At the initial stage, you need to separate the wires that come with the computer, and also examine the rear panel of the system unit. In principle, there is nothing difficult in connecting devices to the system unit, and it will not be difficult to determine the right connector for a specific wire.
Step 2
To connect the monitor to the system unit, you need to find a wire, at each end of which the same plugs will be mounted. One of the ends of the wire is connected to the corresponding connector on the monitor, the other to a similar output on the system unit.
Step 3
The speaker system, keyboard and mouse are also quite easy to connect. If you pay attention, a separate plug has its own specific color, each of which will correspond to the colors of the connectors on the system unit.
Step 4
After the speaker system and other devices are connected, it remains to connect the computer to the network. The set of wires must contain two identical cords (one side is equipped with a plug for a socket, the other with a plug for connecting to the device). These wires are used to connect the system unit and monitor to the network. First, connect the cords to the devices, only then can you plug them into the outlet. Connecting a subwoofer will also not cause any complications - the device is connected to the network with a standard plug, and the speaker connection is schematically displayed on its back.
