Firmware for Chinese phones is a rather rare thing. Therefore, to Russify the mobile, they drain all the phone's memory, process it and fill it in with a normal Russian translation. This is the essence of the firmware of Chinese phones.
Instructions
Step 1
To flash a Chinese phone, you first need FlashTool. The program can be freely found and downloaded on the net.
Step 2
Run the program. Click on the DownloadAgent button and select MTK_AllInOne_DA. Scatter ". Select "options" and click on "com port". Set the port to which the cable is connected with the phone. Click "options" again and select "baud rate". Set the maximum download speed of your internet.
Step 3
Go to the "readback" tab. Click on the "add" button and a line like NA 0x00000000 0x00000000ROM_2 will appear. Double-click just to the right of NA and a window will appear in which you specify the file "back up".
Step 4
Then click on the "readback" button and turn on the phone. A red line will run at the bottom of the screen and then the processor type will appear in the lower left corner, and the memory chip marking in the right corner.
Step 5
Go to the "download" tab and click on the "format" button and select "manual format FAT". Hold down the power button on your phone for one second. A green bar will run at the bottom of the screen. Switch on your phone. All is ready!
