Most of us have Microsoft Office on our computer. But we do not even suspect what possibilities are concealed in such simple programs as Microsoft Word or Microsoft Excel. For example, using Word, you can make a round stamp.
Instructions
Step 1
So, to make a print in Word 2007, first select the tab Insert => Shapes => Basic Shapes => Ring from the main menu. The ring is presented in the form of a symbol consisting of a ring, inside of which there is a smaller ring. Your cursor will change to a cross. Place it on a sheet and make a shape of the diameter you need. The inner ring can be adjusted independently of the outer ring by dragging the yellow flag with the cursor. If you have earlier versions of Word, then open the Draw panel => AutoShapes => Basic Shapes. The subsequent steps will be similar.
Step 2
To write inside the seal ring, choose Insert => WordArt. Choose any style you like, write your text. If the text is short, write it several times. Put asterisks between words. You will end up with regular horizontal text. For it to be written along the perimeter of the ring, then in the tab on the main menu "Format" (double-click on the shape with the left mouse button) select "Change shape" and select either a circle.
Step 3
You can set the color of the text in the same place in the "Format" tab by going to "Shape outline" and "Shape fill". You can change the text by clicking on the "Change text" button in the "Format" tab. Resize the text in the circle to the size of the ring. Right-click on the text, select Format WordArt, and in the Position tab, select Position In Front of Text
Step 4
It remains to make the main text of the print. Select Insert => Text, and with a cross that appears, select the square field, enter everything that is necessary in it. To remove the outline of a square, right-click on the square with the caption and remove the outline and fill.
Step 5
Combine all three objects (AutoShape, WordArt, and Text Box) by selecting one at a time and holding down the Enter key. Right-click to select Group => Group. If you need to adjust something, first ungroup the objects.
