Emulators are installed in the receiver to enter the keys of encrypted channels. The entrance to the emulator is carried out differently for each model using commands sent from the remote control.
Necessary
remote control
Instructions
Step 1
To enter the ARION receiver emulator use the code MENU 19370-2442, for the ARION 1700 use MENU 18370 2486. In the ARROX Free Tiger – X receiver use the code for 2046 for any channel.
Step 2
In the Bigstar receiver enter 9339 for the BGS 6500lux model, in the Bagstar S 67CR - the I button followed by the red button. For Cosmosat devices: 7100 - 9339, 7800 - triple press INFO encoded in BISS, 7810 - also triple press INFO. In Digital device models: 4000 - 9339, 4100 - 1004, 5000 - 9339.
Step 3
In Eurosat DVB 3023 enter MENU and code 3327 or MENU 2020 for other models. In Eurovsky DVB - 8004, SUPER - MENU 2020, Eurovsky DVB - 8004, SUPER - MENU 2020. In Eurostar receivers, write down the code 9999 and press the OK button, before entering, press the menu button.
Step 4
If you are using a receiver from Golden Interstar, press the 0, MENU and red buttons on the remote control. To reset them press 0, go to the emulator of the receiver press the blue button. In GI-T / S84CI PVRX, enter MEMU 8888 to enter, just 8888 to exit. In GS FTA-7001S, press the yellow button and enter 1981 to enter.
Step 5
To enter the emulator of the GLOBO receiver, turn on any channel and click on the combination 9339, 9766, 9776 or 9976, depending on the version of the firmware installed in the receiver. This applies to the 4000 and 4100 models.
Step 6
Enter the emulator of the Samsung receiver using the following combination of code and keys: MENU System info 0000 OK. In SkyGate use MENU - module - red button - 0844.
Step 7
In the Topfield receiver with firmware versions 231, 321, 376 through the system information menu, enter the code 121 from the remote control. If you did not find your receiver in the list, search by the name of the receiver and the codes for the emulator in the encoding you are using.
