A satellite receiver (receiver) is able to connect a computer or TV with digital television, it makes it possible to watch television programs and listen to radio stations in digital quality.
Necessary
- - computer;
- - receiver.
Instructions
Step 1
Connect the receiver to the antenna and TV using special connectors and turn it on. The channels may have already been stored in the receiver's memory, they can be found in the list. If they are not there, set up the satellite receiver yourself. Press the "Menu" or "Setup" key on the remote control. On some models of receivers, the menu can be called up by pressing the "OK" key.
Step 2
Set the menu language to English - this will make it easier for you to tune the channels on the satellite receiver. To do this, go to the menu item "Basic Settings" -> "Language" and select English. Then go to the sub-item "Time settings", enter the current time using the buttons on the remote control. Enter the code if required. Usually it is required to enter some menu items (it can be 0000 or 1234). Set the basic settings for the satellite receiver as follows: positioner - off, 0 / 12V - off, tone flash - off. When connecting satellite heads to the switch, write down the input numbers for yourself and set the ports accordingly in the settings.
Step 3
Go to the menu item "Search", select the command "Search for channels". Select unencrypted channels to scan to tune your satellite receiver to watch free channels. This option is indicated in the channel search menu by the FTA only command.
Step 4
To add channels, scan the transponder on the satellite. Determine the channel you need and on which satellite it broadcasts. Next, define the settings from the list of transponders for satellite channels on the website https://sputnik.vladec.com/instrukciya/parametry-i-chastoty-transpondera-… If the desired channel is not in the list, find it using the search engine along with the word "Lingsat"
Step 5
Go to the section "Transponder settings", select the desired one or add a new one. Then press the button on the remote control to scan the transponder. Then select the "Auto Scan" function, after which the satellite receiver will automatically find all the working channels.
