The very process of enabling an additional kernel in the BIOS is reduced to setting the checkbox in the Enabled field of the corresponding section. The main difficulty is determining the possibility of performing the processor unlocking operation and searching for the desired partition.
Instructions
Step 1
Make sure the motherboard of your computer meets all the requirements for enabling an additional kernel and remember that the procedure you choose may cause the system to malfunction.
Step 2
Do not forget to reboot the computer system after unlocking the additional kernel and test it for functionality.
Step 3
For Asus: - AMD SB750 and 710 south bridges - go to the Advanced tab and select the CPU Configuration item, select the Enabled option in the Advanced Clock Calibration line and repeat the same action in the Unleashing Mode field that appears; - nVidia chipset - go to the Advanced tab and use under the JumperFree Configurarion section, check the box in the NVIDIA Core Callibration box to perform the desired action; - motherboards that support the Asus Core Unlocker function - go to the Advanced tab and use the CPU Core Activation items together with the Asus Core Unlocker.
Step 4
For MSI: - AMD SB750 and 710 south bridges - open the Cell Menu and apply the checkboxes to the Advanced Clock Calibration field, repeat the same action in the Unlock CPU Core line; - nVidia chipset - expand the Cell Menu and go to the NVIDIA Core Calibration section; - motherboards motherboards supporting MSI's Unlock CPU Core - open Cell Menu and use the Unlock CPU Core item.
Step 5
For AsRock: - AMD SB750 and 710 south bridges - go to the Advanced tab and specify the Advanced Clock Calibration command (there are options: open the OS Tweaker menu and select the same command), the L3 cache is managed in the L3 Cache Allocation section; - nVidia chipset that supports NCC function - go to the Advanced tab and select the NVIDIA Core Callibration item, enable additional poison in the Active Core Setup line; - motherboards that support the UCC function - open the OS Tweaker menu and go to the ASRock UCC section, enable the additional core in the CPU Active line Core Control.
