Many people use special programs to configure the parameters of the computer. Not everyone knows that most of the basic settings can be done through the BIOS menu.
Instructions
Step 1
Turn on your computer and hold down the Delete key (F2, F8). After a while, the motherboard BIOS menu will open. To change the temperature of most devices, you can change the parameters of the fans. Press the F1 and Ctrl key combination, go to the Advanced Setup or Advanced Configurations menu.
Step 2
Find the item responsible for the cooling parameters of the system. First, activate the Always On parameter opposite the Fan Mode item. This function prevents the fans from turning off. Find the Fan Speed item and set the required values in front of each cooler. Please note that your version of the motherboard may not have this function.
Step 3
Press the F10 key and confirm the computer restart while saving the cooler operation parameters. If, after performing the procedures, the temperature of certain devices is still higher than normal, then try to reduce their performance. This usually concerns the central processor. This operation will lead to a decrease in the speed of the PC, therefore, this method is resorted to only in extreme cases.
Step 4
Install the Speed Fan program and try using it to change the parameters of the fans. Activate the item "Auto adjustment". This will allow the utility to automatically increase the rotational speed of the blades of the necessary coolers to increase the degree of cooling of the devices.
Step 5
If none of the above methods proved to be effective, then replace the required fan. Choose a device with more power. Remember, the size of the cooler matters too. It is better to choose devices that allow you to configure them programmatically. Connect the selected fan to the desired device, turn on the computer and open the BIOS menu. Adjust the parameters of the new cooler.
