How To Connect Headphones To The Front Panel

Table of contents:

How To Connect Headphones To The Front Panel
How To Connect Headphones To The Front Panel

Video: How To Connect Headphones To The Front Panel

Video: How To Connect Headphones To The Front Panel
Video: Front Panel Audio Jack Not Working. Fix Computer Front Panel Sound Problem. 2024, November
Anonim

Over the past 5 years, one can observe a clear trend in the modification of ATX system units. On the front panel, the manufacturer tries to expose almost all connectors for devices that can be used on a daily basis. First, USB connectors migrated to the front panel, then connectors for audio devices, and then connectors for card readers. It is certainly very convenient. True, sometimes these devices are not connected, because of this they are not used, and the user, out of old habit, reaches for the back of the system unit.

How to connect headphones to the front panel
How to connect headphones to the front panel

It is necessary

ATX system unit, headphones with plug 3, 5

Instructions

Step 1

Of course, additional connectors can be seen not only on the front panel of the system unit, but also on the keyboard. This type of connector placement has become much more popular because some PC users prefer to place the system unit on the floor. But if the length of the wire of your headphones allows you to freely reach without pulling the wire, then connecting to the system unit will be a good option.

Step 2

It often happens that a computer you purchased has connectors on the front panel for audio devices, but the internal ribbon cable is not connected to the corresponding connectors on the sound card. In order to check the performance of this type of connector, you need to turn on the computer - wait for the operating system to load - start any player - insert the headphone plug into the green connector on the front panel of the system unit. If the sound disappears from the speakers, but appears in the headphones, then everything was connected correctly.

Step 3

But it also happens that the internal loop is not connected to the sound card. In order to solve this problem, it is necessary to turn the system unit towards you with the back side. As a rule, 2 wires with jack 3, 5 plugs should be visible on the back of the system unit. One of them will be green (speakers-), the other wire will be pink (microphone). Connect them to the appropriate connectors.

Step 4

If, in this case, the sound does not come to the front panel, then you should think about going to the computer store where this computer was purchased.

Recommended: