Windows Safe Mode is a special operating system startup mode that occurs with a limited set of drivers and files. In this mode, programs do not start automatically, but only a basic set of drivers is used, without which the OS would be impossible to start. It is also needed in cases where Windows does not start in normal mode. But after you have completed the necessary operations, you need to exit safe mode.
It is necessary
Computer with Windows OS
Instructions
Step 1
After booting in Safe Mode, you must exit from it. Before doing this, check if you have made all the changes for which Safe Mode was loaded, so as not to repeat everything again. Also, remove any floppy disks and DVDs from your computer just in case.
Step 2
After that, you will need to click the "Start" button and send the computer to restart with the corresponding button. Never shut down the computer hard by turning off the power. It is preferable to close all windows.
Step 3
During Windows startup, depending on the shutdown circumstances, a message about the desired operating system boot mode may appear. This usually happens if the OS has been shut down incorrectly before. Choose the normal download mode and wait for the download to finish. If the operation of the OS or the computer was shut down correctly, in accordance with the recommendations described above, then no windows will appear, and Windows will immediately start in normal mode.
Step 4
Another way to exit safe mode is to run the msconfig tool. To do this, in the "Start-> Run" menu, type msconfig, and in the window that appears, on the "General" tab, find and select the line that assumes normal startup of the operating system. Check it out. Next, restart your PC and work in standard mode.
