When configuring computers that are part of a local network, you must correctly set the IP address parameters. The choice of characteristics depends on the equipment used to build the network.
Instructions
Step 1
If the local network is operated using a router or router, then it is wiser to use dynamic IP addresses. In this case, their values will be automatically assigned to computers. This method allows you to quickly connect a new device to the network without performing almost any settings. Turn on the desired PC and wait for the system to boot.
Step 2
Click the "Start" button and select the "Network Connections" menu. Go to the list of network cards or local connections. Open the properties of the network adapter whose settings you want to change. To do this, right-click on its icon and select the appropriate item.
Step 3
Highlight the line "Internet Protocol TCP / IP" and click the "Properties" button. Find and activate the "Obtain an IP address automatically" item. Now, in the same way, select the "Obtain DNS server address automatically" item. Click the Ok button.
Step 4
In situations where a local network is built using a network hub or switch, it is recommended to set the values of the IP addresses yourself. To complete this procedure, reopen the TCP / IP properties.
Step 5
Check the box next to Use the following IP address. Complete the table provided with the IP address, subnet mask, and default gateway (optional).
Step 6
If you need to use a specific computer or network equipment to connect to the Internet, fill in the "Preferred DNS Server" and "Alternative DNS Server" fields. Save the parameters by clicking the Ok button.
Step 7
When configuring network connections in the Windows Seven operating system, it is recommended to use the TCP / IPv4 protocol. It is he who is used in most cases to build local networks.
