How Can You Increase The RAM

Table of contents:

How Can You Increase The RAM
How Can You Increase The RAM

Video: How Can You Increase The RAM

Video: How Can You Increase The RAM
Video: How to Increase RAM on Windows 10 (Complete Tutorial) 2024, November
Anonim

Random access memory is the main element that interacts with the central processor of the computer. The CPU receives the necessary information from the RAM modules. Naturally, increasing the amount of this type of memory improves the performance of the computer.

How can you increase the RAM
How can you increase the RAM

Necessary

  • - Speccy;
  • - set of screwdrivers.

Instructions

Step 1

To properly increase the RAM, it is necessary to find out the important characteristics of the motherboard and existing RAM modules. The Speccy program will help you with this. Download and install this app.

Step 2

Launch the Speccy program window and click on the "RAM" link. Carefully study the information in the menu that opens. First, find out the number of free memory slots.

Step 3

Now check the type of memory cards and the bus bandwidth. Also, pay attention to the amount of RAM modules that are active. Based on this information, purchase the required number of new memory cards.

Step 4

It is important to understand that installing modules with lower bandwidth can negatively affect the overall performance of the RAM. Take your choice of new boards very seriously.

Step 5

Unplug your computer from AC power. Open access to the internal devices of the system unit. To do this, unfasten the left side of the case. Find free slots for installing RAM modules.

Step 6

If you decide to replace existing boards, carefully remove the unneeded modules. To do this, undo the latches located on both sides of each device.

Step 7

Install the new RAM modules carefully in the correct direction. Make sure the latches are firmly closed. Pay special attention to this point when working with DDR2 boards. When installing them, there is a risk of incorrect polarity selection.

Step 8

Close the block case. Turn on your computer. After loading the operating system, launch Speccy and make sure that the new modules are defined and working.

Step 9

When installing new cards in the mobile computer, turn off the device and remove the battery. Turn the laptop over and open the memory card compartment. Unscrew the necessary screws from the housing beforehand.

Recommended: