The performance of most modern computers can be increased without installing new hardware. This process is called "overclocking". It must be done very carefully.
Necessary
Clock Gen
Instructions
Step 1
Better to start with overclocking the CPU. The performance of this device directly affects the speed of the entire computer. All necessary manipulations can be performed through the BIOS menu of the motherboard. Restart your computer and open this menu by pressing the Delete key.
Step 2
Go to the Advanced Chipset Setup menu and find the items responsible for the parameters of the CPU. In this case, you are interested in three parameters: voltage, bus frequency and multiplier. The easiest way to increase the overall CPU clock speed is to change the multiplier value. Unfortunately, this method does not always give the desired performance gain for other devices. Start by increasing the bus frequency.
Step 3
Raise this figure by 50-60 MHz. Be extremely careful when setting up a dual-core processor. If the system allows you to change the operating parameters of each core separately, then select identical values. This will have a positive effect on the performance of the CPU. After increasing the bus frequency, change the voltage reading. It is better to initially increase the voltage level by 0.1-0.2 volts.
Step 4
Return to the main BIOS menu and highlight the Save & Exit item. Press the Enter key and wait for the computer to restart. Install the Clock Gen utility to check the health of the CPU and evaluate its performance. Repeat the algorithm to increase the bus frequency of the CPU and check its operation until the utility detects errors.
Step 5
Set the optimal parameters. Check the processor temperature to prevent overheating of this unit. To do this, use the Everest or Speed Fan utilities. Use the second program to tune the coolers to provide maximum cooling for your personal computer.
