Many users have already found it very convenient to use wireless Internet at home. You can use the services of a provider to connect a wireless access point, or you can create and configure such a network yourself.
It is necessary
- - Wi-Fi router;
- - network cables.
Instructions
Step 1
To carry out this process, you will need to purchase a Wi-Fi router (router). You shouldn't run to the store and buy the first equipment you see. First figure out which router you need.
Step 2
To do this, study the characteristics of the wireless adapters of netbooks, laptops and other devices connected to the Wi-Fi router. If you do not have instructions for these devices, then visit the official website of the manufacturer of your equipment. Find out the types of networks and the security protocols they work with.
Step 3
Purchase a Wi-Fi router that matches the specifications of your wireless adapters. Connect the purchased device to the mains and turn it on.
Step 4
Connect the Internet connection cable (DSL, WAN) to the Internet connection cable. With the Ethernet (WAN) port, in turn, connect the network card of a laptop or desktop computer using a network cable.
Step 5
Open the browser on the device connected to the Wi-Fi router. Enter the IP address of this equipment in the address bar. If you do not know the original IP address of the router, refer to the user manual for that equipment.
Step 6
The main menu of the router's Wi-Fi settings will appear on the display. Go to the "Internet Settings" menu. Set the required parameters for the items that your provider recommends to fill out. Save the settings.
Step 7
Open the Wireless Settings menu. Create a new wireless access point with the desired security and radio transmission types. Save the settings and reboot the Wi-Fi router.
Step 8
Disconnect the cable from the Ethernet port. Check for a wireless hotspot and internet connection.
