Receivers usually have a special emulator program as part of their software, where keys are usually entered. Keys are needed to watch certain TV channels.
Necessary
- - Internet access;
- - cable;
- - flash drive;
- - firmware program;
- - keys;
- - remote controller.
Instructions
Step 1
Open the service menu of your receiver, and then proceed to enter the keys into the emulator program. It is not present in every device model, everything here may depend on the installed software. If you do not have an emulator program in your receiver, then you will simply have nowhere to enter the keys. In order for it to appear, be sure to reflash the device with one of the latest software versions.
Step 2
For flashing, use one of the commonly used methods - using a drive or using an Internet connection. In the first case, you will need a removable drive formatted in the Fat32 file system, in the second - a null-modem cable and a program designed to flash your receiver. In both cases, you need a user manual, a service manual, a flashing manual, and Internet access.
Step 3
If you want to enter the keys into the receiver using the first method of flashing the device, download software that has good user reviews and check it for viruses and malicious code. Install it from the service menu of the receiver, after connecting the device and entering the software update mode from a removable storage device.
Step 4
If you decide to update the software in the second way, connect your computer's modem and the receiver using a cable, launch the pre-loaded software and select the connection port, firmware program, device model and update the receiver configuration. After that, start the flashing procedure.
Step 5
Find a list of keys for viewing channels on the Internet and enter the keys you need into the emulator program of your receiver using the remote control.
