Disassembling your tablet varies by model and manufacturer. Some models can be disassembled to a screw in just a few minutes, while for others this process can take up to half an hour.
Many curious users are interested in how to disassemble a tablet. First of all, I would like to warn that self-parsing of the device can lead to damage or complete failure.
Like many other types of modern electronics, tablet cases are assembled with latches, without the use of screws. In order to separate the display module from the base, you must use a very thin and flat object, such as a knife or special spatula. The choice of the tool will determine how successful the analysis will be. The thinner it is, the less likely it is to damage the tablet case.
The tip of a spatula or knife must be pushed into the gap between the display and the case and slightly applied. The display should start to detach. Thus, you need to walk around the entire perimeter of the tablet. Depending on the model of the device, there may be a different number of latches in it. All of them must be carefully disconnected. Using a second spatula or knife can help with this. After the display module has moved away from the base, it is necessary to disconnect all cables connected to it.
After disconnecting the display module, you can see the battery, motherboard, polyphonic blocks, and various modules inside the tablet. All of them are connected to each other with loops and attached to the body with screws and double-sided tape. These parts can be easily detached if necessary.
The assembly process should be carried out in the reverse order.
As you can see, there are no particular difficulties in disassembling the tablet. However, this process requires a certain dexterity and some skills in working with electronics.
