The process of connecting a router to a computer is quite simple, even a beginner can figure it out. Difficulties can arise only when setting up the device. Next, we will consider connecting a computer using a cable, as well as wirelessly.
Step-by-step process of connecting a wi-fi router to a computer
1. After opening the box with the router, it must be connected to the network. There is a power button on the back that must be pressed. In case of good condition, the lamps should light up.
2. In the place where the power key is located, there are sockets. One of these nests is always on the edge and is highlighted in a certain color. It says WAN. It is also necessary to connect the Internet cable to it.
If you hear a click, then the cable was inserted correctly.
3. If you need a cable that connects to your computer, you can plug it into any other jacks. If the light is on, then the signal is being received.
4. In the case of a wireless connection, all steel settings are made on the computer. To do this, you need to have data from your internet service provider.
Connecting a computer to a wi-fi router via a cable:
1. The wire should be inserted into the slot of the router marked WAN.
2. The network wire connects to any other socket on the router.
3. Plug the other end of the wire into a port on your computer called Ethernet. After the actions taken, the light should blink.
In case of difficulties, you need to make sure that the wires are connected to the device correctly. The most common reason why you can't connect your router to your computer is because the cables are incorrectly connected.
If you have coped with connecting the router to a stationary computer, then keep in mind that with a laptop the process will proceed in the same way.
