How To Refill A Chip Cartridge

Table of contents:

How To Refill A Chip Cartridge
How To Refill A Chip Cartridge

Video: How To Refill A Chip Cartridge

Video: How To Refill A Chip Cartridge
Video: Refillable cartridges for Canon PGI-270, CLI-271 with reset chips 2024, May
Anonim

To refill a chip cartridge? you are unlikely to need special skills, since the hardest part of solving cartridge problems is precisely working with replacing or programming the chip.

How to refill a chip cartridge
How to refill a chip cartridge

Necessary

  • - syringe;
  • - toner;
  • - ink;
  • - cartridge;
  • - sticker;
  • - screwdriver.

Instructions

Step 1

If you have an inkjet printer cartridge that requires refilling, first prepare a special sticker with which you will need to seal the hole from the needle. It's best not to use tape unless you want the ink to leak out.

Step 2

You can also use the one that is already glued to the case, however, in most cases it turns out to be unusable on the second or third refueling. It is best to use regular stickers sold at stalls and stationery stores.

Step 3

Peel off the sticker from the cartridge body of the inkjet printer, draw ink of the corresponding color into a syringe and put a needle on it. Insert it 1 to 2 centimeters into the cartridge body. Be sure to consider the capacity of your cartridge. It is best not to pour ink into it.

Step 4

Try to do this as slowly as possible as the ink should be absorbed evenly. After that, close the hole from the syringe with a sticker, first making sure that it keeps the ink from flowing out.

Step 5

Leave the cartridge on for a few hours, turning it over periodically. Then install it in the printer and do a test print.

Step 6

If you need to refill a chip laser printer cartridge, disassemble it with a screwdriver, if necessary, writing down the sequence of steps. It is important to follow safety guidelines when handling toner, as this ink contains substances hazardous to health.

Step 7

Do not allow toner to come into contact with mucous membranes, do not inhale it, and after refilling the cartridge, be sure to wash your hands so that no traces of working with ink remain on them.

Step 8

Clean the parts of the cartridge from toner residues, clean its container, then add ink, preferably 10% less than its required capacity. Close the container, reassemble the cartridge in the reverse order. Print test pages.

Recommended: