Nowadays, it is difficult to imagine a modern office without such a wonderful device as a printer. It is one of the "engines" of the workflow and allows you to maintain documentation without undue effort. In addition, the printer is an irreplaceable assistant in solving problems arising in connection with the printing of text documents for home work. Therefore, if you have decided on the choice of a printer and found it necessary to purchase a laser, the most economical among the modern "family" of printers, then you will need to connect it. In order not to resort to the help of a specialist (which is never free), use the simple instructions.
Necessary
- - laser printer;
- - power socket.
Instructions
Step 1
First, you need to choose a place to install the printer. You must remember that it is best to keep a heavily used laser printer in a well-ventilated room, where there is low humidity and there is no direct sunlight. It is advisable not to smoke in the room and keep pets away from the printer. The installation surface for the printer must be stable and level.
Step 2
During operation, the laser printer consumes at least 300 W of power, so connect the device to a specially reserved outlet. It is better if the computer and the printer will work from different outlets.
Step 3
For the data transfer function, almost all printers use the USB interface, but in some models you can also find an LPT port for compatibility with older computer models. Therefore, when buying a printer, be sure to check with a specialist about the possibility of connecting an output device to your computer.
Step 4
To prolong the life of your printer, you can use the pre-print function to print draft documents or turn on the save mode. A slight decrease in print quality in this case is compensated by an increase in the economy in the use of toner - a powdery substance with which an image is created on paper.
Step 5
If you do not use the printer for a long time, you should cover it to prevent dust from entering it, which will significantly shorten the life of the device or cause it to break.
