Quite often, it happens that some kind of malfunction and malfunction occurs in the computer. If you don't have time to call a specialist, you can set up remote control of your computer, and then your familiar computer technician will be able to solve your problem right from his desktop.
Instructions
Step 1
To set up remote control, you need to use the "Remote Assistance" program built into your computer, or use the special Radmin program.
Step 2
To do this, first of all, you need to log into Windows, install Radmin on both computers and set up a local network connection.
Step 3
First, the server part is configured on the remote computer. To do this, run the rserv34ru.exe file and click the Next button in the window that opens. After you accept the license agreement, you need to activate the "Install" button, wait for the installation to take place.
Step 4
After the installation is complete, check the box next to "Configure user access rights for Radmin Server" and activate the "Finish" button. In the settings window, select either automatic start or manual start and click "OK".
Step 5
If necessary, in the general settings, set the port for the program, and in the "Miscellaneous" tab, select the type of connection.
Step 6
In the Add New User window, you need to specify a username and password, then you can select the rights allowed for the remote user and click OK.
Step 7
After installing Radmin Viewer on your computer, set up remote control by selecting "Connection" and "Connect to" from the menu.
Step 8
In the window that opens, you need to configure the connection parameters and click the "OK" button.
Step 9
Then the connection to the remote computer starts. In the "Radmin Security System" window, enter the username and password and activate "OK".
Step 10
If the use of the "Control" mode is allowed on the remote computer, and the password and username are correct, then you will get access to the remote computer.
