How To Make The Computer Turn On By Itself

Table of contents:

How To Make The Computer Turn On By Itself
How To Make The Computer Turn On By Itself

Video: How To Make The Computer Turn On By Itself

Video: How To Make The Computer Turn On By Itself
Video: Windows 10 Computer Turns on by Itself FIX 2024, December
Anonim

A feature such as turning on your computer automatically can be very useful in a variety of circumstances. In modern PCs, this option makes it easier for the user to work. Often on the Internet, they ask questions that are related to the automatic turning on of the computer. To carry out this operation, you first need to configure the system.

How to make the computer turn on by itself
How to make the computer turn on by itself

Necessary

Personal computer, BIOS

Instructions

Step 1

All settings will be made in the basic I / O system, so the first thing to do is enter the BIOS. It allows you to prepare the computer so that all software can start at startup, and to exercise control over the personal computer.

Step 2

To do this, when the computer boots up, press the “Delete” key for a while. The operating system does not work immediately, so you have to restart the computer several times and press the button.

Step 3

Then go to the “Power Management Setup”.

Step 4

Then go to “Wake Up Event Setup or Wake Up from S5”.

Step 5

Now go to the parameter “Resume By Rtc Alarm” and set the time to turn on the computer for each day. You can set various time parameters in 24 hour format. It is also worth noting that your computer will turn itself off every day, since the settings are designed to permanently store information.

Step 6

Save all the settings you just made. This can be done using the “F10” key. You can also hover over the “Save” tab and press the “Enter” key. Now your computer will turn on at the time that was set in the system.

Step 7

If you need to change the time to automatically turn on the computer, you can also enter the BIOS and change the parameters. If you have a user login password in your operating system, you need to disable it, since the OS will not be able to automatically turn on the slave table due to the password confirmation.

Step 8

This can be done through the "Control Panel" tab. Find the “Accounts” column there. Next, find the user you need and click on the "Change account" button. When the password is disabled, press the “Save” key. Now there should be no problems when turning on your computer automatically.

Recommended: