A hard disk is an electromechanical device responsible for storing and processing information. It is prone to increased potential for breakage and failure. If such a nuisance has occurred, then you should not be upset ahead of time. It is unlikely that the hard drive will be able to restore its previous performance, but it is possible to save valuable information.
Necessary
Hard disk scanning software
Instructions
Step 1
Install the hard disk distribution kit supplied by the manufacturer into the CD or DVD drive. This disk must certainly be included in the set of any personal computer, just like, for example, a video card or motherboard disk.
Step 2
As the operating system boots, press the F8 key on your keyboard and select Boot from disk. It's important to hit F8 in time. In order not to make a mistake, press it several times when turning it on. So you can definitely bring up the desired menu.
Step 3
Run the hard disk surface scanning program. This program will mark all bad sectors of the hard disk, as a result of which non-working zones will be excluded from the operating system. This is a critical step in the hard drive revitalization operation.
Step 4
Restart your computer. Select Windows Standard Boot from the list of suggested options. If the system fails to start, insert the operating system installation disc into the drive and reboot. Never open the sealed hard drive enclosure. If dust or other abrasive material gets on its surface, then it will certainly fail in a maximum of a month and a half.
Step 5
If you cannot restore the hard disk using the available programs, you need to contact the service center for help. It may be that the recovery of the hard drive is simply impossible due to too serious damage. To hand over the device for repair, contact the service center, which is indicated in the quality passport. This document must also include the date of sale and the stamp of the organization. An incomplete warranty card is not a document justifying warranty repairs.