The Yota modem is a special device that provides computers with access to wireless Internet based on 4G technology. It can be easy to disassemble the various models of this modem, and some of them may be difficult.
Necessary
screwdriver
Instructions
Step 1
Be sure to familiarize yourself with the internal device diagram of your modem. If you want to disassemble the Yota modem, remove the top covers from the device by slightly pulling them towards you. If you cannot remove the back cover, pry it slightly with a flat screwdriver. Peel off the side tape, then remove any other visible fasteners. In the course of extracting the constituent parts. Remember the sequence, since you will have to assemble the modem taking it into account.
Step 2
If you want to disassemble the Yota-Egg modem, find some way to open the plastic rivets, as in most cases you just have to break them and then glue them together with super glue. Please note that the housing is easy to remove, so do not use too much force to open it. Disassemble the modem on a covered surface so as not to lose small parts.
Step 3
Whatever modem you disassemble, in no case lose its component parts, since they are almost impossible to replace. Disassembling modems, and even more so Yota is not recommended at all in independent conditions. There are currently no official instructions for disassembling Yota modems, so you will have to do everything at your own peril and risk, and even despite the experience you may have, it is best to entrust this business to the professionals of service centers, since this modem appeared on the market relatively recently. and not all aspects of its disassembly have been studied by users at the moment.
Step 4
Also, if possible, record the sequence of parsing the modem on video in order to view the recording and assemble the device later. This is convenient if you cannot remember exactly the sequence of your actions, or you want to later post the entry as an instruction on the Internet.
