If after connecting the speakers to your computer, no sound is produced, there are a number of settings you need to make to fix the problem. It should be noted that setting up all the necessary parameters is performed quickly enough and does not require any special knowledge of the PC device from the user.
Necessary
Computer, speakers
Instructions
Step 1
When connecting speakers, you should pay attention to the informers that pop up on the desktop. In most cases, after connecting audio devices to the computer, the system displays an add-on window, in which the user must specify the type of connected equipment.
Step 2
So, by inserting the device plug into the audio output on the computer, in the window that opens, set the Line Out parameter. If, after connecting the speakers, no informer appears on the desktop, then the operating system has automatically detected the type of equipment. Now you can move on to the next step.
Step 3
Before you proceed with further settings, turn on the speakers by setting the volume control on the product to the maximum position. Make sure the “MUTE” mode is off.
Step 4
Open the sound playback settings on the computer by left-clicking on the speaker icon located in the system tray. Set all controls to the up position. If after these actions the sound does not appear, go to the "Parameters" section and click on the "Properties" menu.
Step 5
Check the boxes next to all values, and then save the changes. Now the sound settings window will be supplemented with a number of additional controls. You need to set them all to the maximum position, and then check the functionality of the audio device. After making changes in the audio settings section, the connected speakers will work normally.
